Here is a list of current machine specials that goes out to all my customers via email once or twice a month. Many of these machines are listed on the tabs at the top of the page and include photos, info-specs, and even a short video link of the machine running. Just send us an email if you would like to be added to our equipment list email. Keep in mind that if you don't see what you need here, that we work with a vast network of associates and can find just about anything you may need. Take a look and contact us with any questions.
#1 Polar 92 EMC 36" programmable paper cutter, in great condition!
This system is clean and in great working condition.
Comes with extra knife, knife change tools and manual.
Take a look at the youtube link below to see a video of it running:(you may need to copy and paste in your browser)
https://youtu.be/EuKp8etWnwI?si=tzauDqr60xASlflh
Machine Specs
Type: Paper Cutter
Make: Polar
Model: 92 EMC
Size: 36"
Sheet Width: 36"
Sheet Depth: 36"
Cutting width: 92cm / 36-1/4"
Clamp Opening: 11 cm / 4 5/16″
Power required (main drive): 3 kW / 4.1 H.P.
Clamp pressure:
Min.: 150 daN (= kp) / 330 lbs.
Max.: 3000 daN ( = kp) /6600 lbs.
Knife Thickness: 11.7 cm / 7/16″
Grinding Reserve: 3 cm / 1 3/16″
Smallest Cut:
Without False Clamp: 2 cm / 13/16″
With False Clamp: 9 cm / 3 1/2″
Backgauge Speed:
Slow: 2.7 cm/sec
Normal: 15.8 cm/sec
Electrical:
235V / 14A / 60 Hz
3 Phase
Fantastic system so grab it while its here. Just $13,500.00 !!!
(delivery & installation can be quoted per location)
#2 Standard Horizon SPF-11 stitch/fold booklet maker,
with FC-11 trimmer, in great condition!
This system can be run in-line with a Horizon VAC-100 or MC-80 collator towers or run as a stand alone and be hand fed. Note that this system utilizes spools of stitcher wire, for testing purposes we only threaded a few feet of wire through the stitcher heads which is why you dont see the wire spools mounted.
Take a look at the youtube link below to see a video of it running:(you may need to copy and paste in your browser)
https://youtu.be/RvTRo1cMCGc?si=gZGr87kt545SjdPE
Specifications on Standard Horizon SPF-11 Stitcher & Folder
Model: SPF-11
Sheet Size:
Stitching & Folding:
Max.: 330 x 470 mm (12.9″ x 18.5″
Min.: 210 x 210 mm (8.3″ x 8.3″)
Top Stitching:
Max.: 330 x 364 mm (12.9″ x 14.4″)
Min.: 148 x 210 mm (5.8″ x 8.3″)
Corner Stitching:
Max.: 330 x 297 mm (12.9″ x 11.7″)
Min.: 148 x 210 mm (5.8″ x 8.3″)
Stitcher Motion: Stitching heads are cam-operated simultaneously.
Stitching Pitch: Adjustable within the range of 80 to 280 mm (3.1″ to 11″)
Stitching Wire Diameter: Standard: 0.52 mm (1.02″)
Stitching Thickness: Maximum: 4 mm (0.25″)
Production Speed: Maximum: 2,600 booklets/hour
Electrical:
120 V
60 Hz
3.3 A
Specifications on Standard Horizon FC-11 Fore-Edge Trimmer
Model: FC-11
Cutting Dimensions: Spine to fore edge: 99 to 225 mm (3.9″ to 8.9″)
Booklet Size (Before Trim): 100 x 200 mm to 240 x 330 mm (4.0″ x 7.9″ to 9.4″ x 12.9″)
Trimming Length: 15 mm (0.6″)
Cutting Thickness: 44 sheets of 80 gsm stock
Production Speed: 2600 booklets/hour
Electrical:
120 V
60 Hz
5.0 A
Fantastic system so grab it while its here. Just $5,250.00 !!!
(delivery & installation can be quoted per location)
THIS UNIT RUNS GREAT! More pics available
#3 Xante PlateMaker 6 Computer-to-plate system in excellent condition!!
Click on link below to watch video: (you may need to copy and paste in your browser)
https://youtu.be/mJ_H7qNav1w?si=0kEg9QtfANXTRRA-
THIS UNIT HAS IMAGED JUST 2000 PLATES!
A Profitable Difference!
This CTP system was just pulled from a vocational school environment has barely been used.
Also has the memory upgrade for 2400 x 2400 dpi resolution
PlateMaker 6 Specifications
Imaging Speed: Up to 120 plates per hour
Resolutions: 1200 x 1200 dpi (standard), 2400 x 2400 dpi (optional)
Processor Fast IDT 79RC32355
MemoryStandard 128 MB SODIMM, expandable up to 256 MB; Optional internal IDE drive available
Imaging UnitSelf Contained Proprietary
IU Life7,000 sheets, (letter; 5% coverage)
Myriad 2 PlatesAvailable in the following sizes: 10" x 15", 10" x 15½", 11" x 18", 11" x 18½", 11¾" x 18½", 11¾" x 19³/₈", 11¾" x 19³/₈", 11¾" x 19â·/₈", 12" x 18", 12" x 19³/₈", 12" x 19â·/₈", 12" x 25", 13" x 19³/₈", 13" x 19â·/₈"340mm Option13³/₈" x 19â·/₈" (340mm x 505mm)
Media Weights 4 mil plates - Plate Auto LoaderPlate Input50-plate auto loader
(standard)Dimensions(W) 22.8" x (H) 16.24" x (D) 23.68" with cassette
Weight 73.3 lbs.
Power100-127 V~50/60 Hz, 6.5 A (220-240 V~50/60 Hz, 3.2 A)
Noise Level Printing - less than 49.5 dB; Standby - less than 35 dBPrinter
Adobe PostScript 3Typefaces136 resident PostScript Typefaces; TrueType® 42 font rasterizer; Types 1/3/4/5/6 PostScript download supportInterfaceSimultaneously active - 10/100BaseT Ethernet® (EtherTalk®, TCP/IP, LPR, IPP)
JUST $4,200.00 !!!
(delivery & installation can be quoted per location)
#4 GBC ProClick Pronto automatic coil binding system Like new/Demo model!
This system comes with $1,000.00 worth of ProClick spines!
By far the simplest and fastest binding system ever made. If you need 8.5"x 11" professionally bound books that must lay flat and have the option to edit pages with ease then grab this system fast!
WATCH VIDEO LINKS BELOW (you may need to copy and paste in your browser)
https://youtu.be/NcUyEpuxCo8
https://youtu.be/aHGdwnQNrBw
Specifications:
GBC ProClick Pronto P3000
The ProClick Pronto P3000 is an all-inclusive punching and binding system perfect for shared work environments. This automated desktop unit pairs superior productivity and ease of use with the sleek appearance and true editability of the revolutionary ProClick binding style. Simply punch, size your document and bind with the press of a button--no training required!
Binds documents up to 100 sheets thick using a 5/8" ProClick binding spine
Simple one-button operation, no user training required
Intuitive LCD interface provides easy-to-follow instructions
Document-sizer ensures correct spine selection every time
6-second cycle enables binding of up to 450 books/hour
Pre-loaded cassettes holding 20 spines each eliminate the need for loading individual spines
Punches up to 15 sheets of 20lb bond paper
Small footprint occupies no more space than a laser printer
Ideal for sales proposals, presentations, training materials, financial reports
Binds 8-1/2" x 11" documents up to 100 pages
Electric Punch capacity: 15 sheets
Works with any 8-1/2" x 11" standard size cover
Maintenance free!
Fantastic system so grab it while its here. Just $3,295.00 !!!
(delivery & installation can be quoted per location)
#5 Hans Wahli SO envelope feeder in Excellent condition!
These envelope feeders ARE UNQUESTIONABLY THE BEST MACHINES EVER BUILT. Designed by Swiss engineer Hans Wahli it is built from high end aircraft grade aluminum and steel and incorporates simplicity with very few moving parts yet delivers heavy duty high speed results day in and day out. Its in MINT CONDITION and ready to work TODAY!
Take a look at the youtube link below to see it running:(you may need to copy and paste in your browser)
https://youtu.be/fCzJzZz-Z0s?si=fyDmye6XUk1A_Kx2
Specifications.
Envelope Feeder Description
Desinged for Ryobi, Hamada, AB Dick, Multigraphics, Chief 15, Iteks, Tokos and others.
Continuously feeds envelopes. No need to stop and reload the press paper tray every few hundred envelopes.
Installs quickly with no electrical or mechanical connections to the press
No tools needed for set-up or changeover to other stock sizes
Feeds envelopes and stock from 3 5/8 x 3 7/8 up to 12 x 15
Specs
Width - 23"
Length - 35"
Height of feed table - 30" min 37.5" Max
Weight 332lbs
Width - 12"
Fantastic system so grab it while its here. Just $5,800.00 !!!
(delivery & installation can be quoted per location)
#6 Stahl-Heidelberg TX52/4-4 20"x26" continuous feed folder in fantastic condition!
Includes 8 pg right angle along with air pump, and roll-up delivery.
This system is in excellent condition and was kept under service contract since new. The rollers are in excellent condition and its ready to go to work in your shop today!
Runs on 3 phase 230 volt
Fantastic system so grab it while its here. Just $12,890.00 !!!
(delivery & installation can be quoted per location)
#7 Stahl-Heidelberg TF66/4-4-4 26"x45" continuous feed folder in fantastic condition!
Includes 8 pg and 16 pg right angles along with air pump, and hang on delivery.
This system is in excellent condition and was kept under service contract since new. The rollers in all units are in excellent condition and its ready to go to work in your shop today!
Runs on 3 phase 230 volt
Fantastic system so grab it while its here. Just $14,750.00 !!!
(delivery & installation can be quoted per location)
#8 GBC Unibind perfect binding system Like new/Demo model!
This system comes with $6,000.00 worth of steel hot glue spines!
This system allows you to perfect bind 8.5"x 11" books with a very rugged and classy appearance via the steel hot melt glue spines. With the 6 magnetically activated heat cradles all on the same platen you can bind a complete book of any spine width every 20 seconds!
WATCH VIDEO LINKS BELOW (you may need to copy and paste in your browser)
https://youtu.be/6fOwhMPKxoc
Specifications:
GBC Unibind
Binds documents up to 220 sheets thick using a spines of various thicknesses
Simple magnetic switch heat activation on 6 spine channels
Intuitive LED lights indicate when binding and when finished
Document-sizer ensures correct spine selection every time
2 min perfect bind cycles between 6 channels allows operator to load and retrieve every 20 seconds producing up to 180 books/hour
comes with cooling rack
Small footprint occupies no more space than a laser printer
Ideal for sales proposals, presentations, training materials, financial reports
Binds 8-1/2" x 11" documents up to 220 pages
can use the translucent sheet cover, or it easily tears off to use custom printed cover.
115v/15a/1ph and Maintenance free!
Fantastic system so grab it while its here. Just $3,500.00 !!!
(delivery & installation can be quoted per location)
#9 Purup Eskofot DPX Genesis Computer-to-plate system
in excellent condition!!
A Profitable Difference!
This CTP system was just pulled from a working environment and is working perfectly. very low use and kept in pristine condition. Comes with the very stable and reliable JAWS RIP and includes a nice flat screen monitor with keyboard and mouse.
This CTP system also includes the imaging unit, internal processor, RIP with rip computer, security dongle, all cabling and manuals.
We are very experienced with these units and thoroughly clean, oil, adjust, and repair/replace any suspect components and then test before making available to our customers.
Specifications:
Imaging Technology: Full drum
Image Area: 12.5" x 21.6"
Plate widths: from 9" - 13"
Plate Lengths: Variable 12'-22'
Plate Material Roll Length: 200'
Production Speed: 25 Plates per hour
Plate Cutter: Automatic precision cutting of each plate
Processor: Internal processor with temperature control and automatic replenishment.
Resolution: 600 - 2400 dpi; Up to 150 lpi screen ruling
Spot Size: 35 um
Laser Technology: 760nm, 1mW Visible laser Red Diode, Class 1 Laser product according to EN60825-1:1994 (CE/CSA)
RIP: JAWS , Post Script, Level 2 compatible system
Input: Accepts Post Script and PDF Files
Operation System: Windows 2000 professional
Interface: 10/100 Ethernet
Dimensions:44.5" H x 30.6" W x 24"
Weight: 450 Lbs.
Electrical: 200-240 Volts AC, 50/60Hz, 15 Amps @ 60 Hz,
JUST $3,400.00 !!!
(delivery & installation can be quoted per location)
#10 A.B.Dick/Presstek DPM2340 Computer-to-plate system in excellent condition!! WATCH VIDEO
A Profitable Difference!
This 2002 DPM2340 comes with the very stable and reliable Harlequin RIP on the preferred Windows 2000 professional platform and includes a nice wide flat screen monitor.
This CTP system also includes the imaging unit, internal processor, RIP with rip computer, security dongle, all cabling and manuals.
We are very experienced with these units and thoroughly clean, oil, adjust, and repair/replace any suspect components and then test before making available to our customers.
This system has had all the segmented rollers replaced for years of trouble free operating.
Specifications:
Imaging Technology: Full drum
Image Area: 13.4" x 19.25"
Plate widths: from 9" - 13.4"
Plate Lengths: Variable 12'-20'
Plate Material Roll Length: 200'
Production Speed: 28 Plates per hour
Plate Cutter: Automatic precision cutting of each plate
Processor: Internal processor with temperature control and automatic replenishment. 5 Gal activator and stabilizer . Includes activator recirculator and filter to extend chemistry life.
Resolution: 900 - 3600 dpi; Up to 175 lpi screen ruling
Spot Size: 10 microns
Laser Technology: 675nm, 10mW Visible laser Red Diode, Class 1 Laser product according to EN60825-1:1994 (CE/CSA)
RIP: Harlequin, Script works, Post Script, Level 3
Input: Accepts Post Script and PDF Files
Operation System: Windows 2000 professional
Interface: 10/100 Ethernet
Dimensions: 54" H x 45" W x 30" D with plate catcher
Weight: 650 Lbs.
Electrical: 200-240 Volts AC, 50/60Hz, 20 Amps @ 60 Hz, 16 Amps @ 50
Check out the video below of this system:
https://youtu.be/TPOr7wwQ7iA
JUST $5,800.00 !!!
(delivery & installation can be quoted per location)
Call us @ 440-949-1201
or send me an email for more details
#11 Strate Flow envelope feeder in Excellent condition!
This system is extremely easy to set-up and run. Its in MINT CONDITION and ready to work TODAY!
Take a look at the youtube link below to see it running:(you may need to copy and paste in your browser)
https://youtu.be/u6Tl8prMV-4
THIS UNIT INCLUDES THE CONVEYOR DELIVERY
Specifications.
Suspension Strate Flo Envelope Feeder with Conveyor
Envelope Feeder Description
Desinged for Ryobi, Hamada, AB Dick, Multigraphics, Chief 15, Iteks, Tokos and others.
Continuously feeds envelopes. No need to stop and reload the press paper tray every few hundred envelopes.
Installs quickly with no electrical or mechanical connections to the press
Timing and speed automatically matches the machine
No tools needed for set-up or changeover to other stock sizes
Micro Lateral Adjustment
Designed for run lengths 1000 & above
Feeds most envelopes from 3 5/8 x 3 7/8 up to 10 x 13 C7 to B4 internationl.
Virtually maintenace free
Specs
Feeder
Width - 15.5"
Length - 47" min 60" Max
Height - 36" min 43" Max
Weight 137lbs
Width - 12"
Converyor
Length - 60"
Height - 19" min 27"max.
Weight -48 LBS
110 Volt
Fantastic system so grab it while its here. Just $2,500.00 !!!
(delivery & installation can be quoted per location)
#12 GBC heavy duty punch & spine inserter in great condition!
WATCH VIDEO LINK BELOW (you may need to copy and paste in your browser)
https://youtu.be/z2p_8V0CPuI
EXTRA BONUS INCENTIVE!
This machine comes with approx $500.00 in comb binding spines of various colors and sizes.
This heavy duty GBC 111PM-2 Electric Comb Punch is a fantastic, affordable solution for someone looking to start comb binding. The 111PM-2 will punch up to 35 sheets of 80 gsm paper up to 15.75 inches long in under 1 second! Super speedy and quiet in operation this comb punch has 28 de-selectable punch pins as well as variable margin depth. The machine is open ended for punching of over-sized stocks.
The quick punch cycle is activated by foot pedal or micro switch depending on what operator preference.
115 Volts, 5.6 Amps, Single Phase, 60Hz
Inserter specs:
Binds Plastic Comb (GBC 19-Hole pattern) documents from 1/4" to 2" thick.
One-step manual binding arm allows for precision opening of binding elements.
Side control knob allows user to pre-set opening position of the element to speed up productivity.
All metal construction provides greater durability.
No operator training required.
Small footprint allows stacking on top of some GBC punches.
Fantastic system so grab it while its here. Just $1,200.00 !!!
(delivery & installation can be quoted per location)
#13 Ryobi 49001 precision video plate punch New these are over 15K. punch with incredible accuracy and ease.This one is perfect/like new for just $1,500.00 !! (was $2,500.00)
OTHER INCREDIBLE OFFERS FOR THE SHOP/PLANT
Challenge companion flat paper jogger $80.00
Most of these items are at my Akron warehouse or in the Northern Ohio area. I can certainly quote/arrange delivery, installation, & training etc if not included in the description.
Lots of pictures available on all of the above equipment and some video so
Call us @ 440-949-1201
or send me an email for more details
THANKS AS ALWAYS FOR YOUR SUPPORT